Generator Set 8

Generator Set 8

This is a 8 kVA Diesel powered 3-phase generator set integrated in a sound dampening rugged outdoor housing, suitable for
installation on a truck.


The complete system is compliant with MIL-STD-810F, and also includes the electrical connection box and generator control panel, integrated inside the outdoor housing.

Automatic start and switch over to a standby generator can be performed by the controller in case of failure of the primary system, in 10-30 seconds.

You can count on RCSO SYSTEMS for reliable power and customized solutions for your application.

General characteristics:Nano5 is a control and protection device for generating sets, suitable for automatic and manual start application
Display Information:Voltage, frequency, fuel level, running hours meter, generator overvoltage/undervoltage protection.
Alarms:High engine temperature, oil pressure, fuel level, low battery voltage.
Two Gensets Standby Operation:Primary generator set is started manually and is powering the load. In case of primary genset failure the secondary genset is automatically started, the primary genset is disconnected, and the load is transferred to the secondary genset. The changeover time is of 10-30 seconds. Note: Only one generator can operate at a time (there is no output synchronization for parallel operation).

Product Specifications

Electrical:Power: 8 kVA (6.4 kW) (ISO Standard Power for continuous operation)
Voltage: 3 phase, 380 V
Frequency: 50 Hz
Power factor: 0.8
Environment:Operating temperature: -10 C to +55 C
Storage temperature: -20 C to +60 C
Maximum altitude: 4160 m above sea level
Compliance: MIL-STD-810F
Engine:Make/Model: Lombardini 12 LD 477/2
Type: 4 Stroke Diesel, Air cooled
Cylinders: 2
Displacement: 0.954 liter
Operational RPM: 3000 rpm
Starter voltage: 12 V
Alternator:Type: Synchronous, 2 poles
Regulation: Automatic, ±1,5% (±1% at static conditions)
Insulation: Class H
Protection: IP 23
Overload capacity: 150% for 10 seconds
Generator Set Housing:Operating sound level: ≤75 dBA at 1 m
Protection: IP 23, prepared for outdoor operation on truck
Doors: Easy access to engine and alternator, with locks
Ancillary Equipment:Starting batteries: 60 Ah, CaCa Technology
Generator controller: Nano5 (see next page)
Fuel Tank: Integrated to genset base frame, autonomy 12 h
Exhaust system: Muffler and exhaust pipe with protection guard
Base frame: Monoblock steel base frame, engine and alternator
installed on anti-vibration mounts. Provisioned for easy
transport with forklift or crane. Powder coating finish.
Other: MIL grade sockets, all fluids necessary for operation (except fuel)
Dimensions and Weight:Dimensions: 1200 x 750 x 750 mm (L x W x H)
Dry Weight: 180 kg
Total Weight: 200 kg