Generator Set 50
This is a 50 kVA Diesel powered 3-phase generator set integrated in a sound dampening rugged outdoor housing, suitable for
installation on a truck.
The complete system is compliant with MIL-STD-810F, and also includes the electrical connection box and generator control panel, integrated inside the outdoor housing.
Automatic start and switch over to a standby generator can be performed by the controller in case of failure of the primary system, in 10-30 seconds.
You can count on RCSO SYSTEMS for reliable power and customized solutions for your application.
| General characteristics: | SAC 35 NT is a control and protection device for generating sets, suitable for automatic and manual start application. |
| Display Information: | Voltage, frequency, fuel level, running hours meter, generator overvoltage/undervoltage protection. |
| Alarms: | High engine temperature, oil pressure, fuel level, low battery voltage. |
| Two Gensets Standby Operation: | Primary generator set is started manually and is powering the load. In case of primary genset failure the secondary genset is automatically started, the primary genset is disconnected, and the load is transferred to the secondary genset. The changeover time is of 10-30 seconds. Note: Only one generator can operate at a time (there is no output synchronization for parallel operation). |
Product Specifications
| Electrical: | Power: 50 kVA (20 kW) (ISO Standard Power for continuous operation) Voltage: 3 phase, 400 V Frequency: 50 Hz Power factor: 0.8 |
| Environment: | Operating temperature: -20 C to +55 C Storage temperature: -20 C to +60 C Maximum altitude: 4160 m above sea level Compliance: MIL-STD-810F |
| Engine: | Make/Model: Perkins 1014A-44TG2 Type: 4 Stroke Turbo Diesel, Water cooled Cylinders: 4 Displacement: 4.4 liter Operational RPM: 1500 rpm Consumption: 14 l/h Starter voltage: 24 V |
| Alternator: | Type: Synchronous, 4 poles Regulation: Automatic, ±1,5% (±1% at static conditions) Insulation: Class H Protection: IP 23 Overload capacity: 150% for 10 seconds |
| Generator Set Housing: | Operating sound level: ≤75 dBA at 1 m Protection: IP 23, prepared for outdoor operation on truck Doors: Easy access to engine and alternator, with locks |
| Ancillary Equipment: | Starting batteries: 60 Ah, CaCa Technology Generator controller: Nano5 (see next page) Fuel Tank: Integrated to genset base frame, autonomy 12 h Exhaust system: Muffler and exhaust pipe with protection guard Base frame: Monoblock steel base frame, engine and alternator installed on anti-vibration mounts. Provisioned for easy transport with forklift or crane. Powder coating finish. Other: MIL grade sockets, all fluids necessary for operation (except fuel) |
| Dimensions and Weight: | Dimensions: 3300 x 1100 x 2300 mm (L x W x H) Dry Weight: 1550 kg |